Some legacy Wi-Fi devices, especially IoT devices, have limited support for the contemporary wireless modes and encryption types. In such a situation, we can find a lot of failed authorization and re-connection requests on the 4G router’s system log. Please follow the below steps to...
On the 4G routers, the Wi-Fi hotspot has been turned on by default and without an encryption password. To secure your Wi-Fi hotspot, please refer to the below Wi-Fi password section and set up a strong Wi-Fi password. Contents Wireless Overview Wi-Fi On/Off Basic Settings...
After logging in to the router admin, go to “Network > Wireless”. Click the “Edit” button on the 2nd row of Master SSID. Country Code Click the tab “Advanced Settings”. Choose USA or Australia on the option of “Country Code”.Save & apply the new settings....
The router default the max transmit WiFi power is 30dBm, but the different countries, the wifi power limited is different; you can refer to the below steps to change the wifi country code to get the max WiFi power if you need. The European countries have limited the WiFi...
Your router’s wifi speed is based on a 4G network. 4G network speed depends on signal strength, concurrent users connecting to the cellular base station, and data flow etc, please check as follows. 1. Check the Antenna Installation Make sure antennas are installed on the correct...
Fix the issue of “Deauthenticated due to inactivity” on iOS and Android mobile devices. The system log shows below. Please refer to the below tutorial to disable Low ACK, disable Legacy Rates, and enable Auto Join on phone and computer to fix the Wi-Fi disconnection...
The default Wi-Fi network is turned on and without the encryption password. You can refer to Wi-Fi SSID & Password to configure the encryption type and password to secure your wireless networks. 1. Log in to the router admin on a web browser.For example, the...